Xenio control panels
Heater's on-time can be changed in two different ways
Remaining on-time
Remaining on-time can be changed when the heater is on (heating) Please note that the on-time is only changed once, so changing the on-time does not save the setting for the next sauna session.
Maximum on-time (permanent setting)
The on-time of the heater is six (6) hours by default. This can be changed permanently for the next sauna sessions in additional settings of the control panel:
How to enter additional settings in Xenio control panel?
Press the control panel buttons - MENU + simultaneously for 5 seconds until the menu opens. The heater must be turned off (standby mode) when entering additional settings. Please note that the buttons do not glow when the heater is turned off.
In the additional settings menu
- Press MENU to move to the next setting.
- Use the - or + buttons to change the selected setting, then press MENU to save.
- Press MENU to move to the next setting until the advanced settings menu closes.
Maximum on-time setting
Note: The maximum on-time setting in WiFi control panels is called "S - 01"
Note: the maximum on-time cannot be changed while the heater is on!